On 09/06/11 13:28, Mohammad Khalil wrote:
hi
i have configured HSRP between 2 7606-S and an ASN Gateway
the standby group is up and one of the routers is active and the other one is
standby
the issue , i cannot ping the HSRP virtual IP address or the configured IP
addresses under the vlan interface
From where? What can't ping it?
is that normal ?
Perhaps. It depends on your config.
uRPF often causes these packets to drop, because each router advertises
the subnet, so for example in the following topology:
host ---- router1 ---<link> --- router2
192.0.1.2 | | 192.0.1.3
\---- <192.0.1.1> ----/
If "host" tried to ping 192.0.1.3, the packet would be received by
router1, emitted into the HSRP subnet, arrive at router2 with:
src=host
dst=192.0.1.3
...and fail the RPF check
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
