Hi , please find below CR1.KJ-Building#sh ver Cisco IOS Software, c7600s72033_rp Software (c7600s72033_rp-ADVIPSERVICES-M), Version 12.2(33)SRD6, RELEASE SOFTWARE (fc3) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2010 by Cisco Systems, Inc. Compiled Sun 19-Dec-10 15:46 by prod_rel_team
ROM: System Bootstrap, Version 12.2(17r)S4, RELEASE SOFTWARE (fc1) BOOTLDR: Cisco IOS Software, c7600s72033_rp Software (c7600s72033_rp-ADVIPSERVICES-M), Version 12.2(33)SRD6, RELEASE SOFTWARE (fc3) CR1.KJ-Building uptime is 1 week, 3 days, 16 hours, 20 minutes Uptime for this control processor is 1 week, 3 days, 16 hours, 21 minutes System returned to ROM by reload (SP by reload) System restarted at 00:29:41 EET Tue May 31 2011 System image file is "sup-bootdisk:c7600s72033-advipservices-mz.122-33.SRD6.bin" Last reload type: Normal Reload cisco CISCO7606-S (R7000) processor (revision 1.0) with 983008K/65536K bytes of memory. Processor board ID FOX1213GJYZ SR71000 CPU at 600Mhz, Implementation 0x504, Rev 1.2, 512KB L2 Cache Last reset from s/w reset 1 SIP-400 controller (5 GigabitEthernet). 18 Virtual Ethernet interfaces 71 Gigabit Ethernet interfaces 1917K bytes of non-volatile configuration memory. 8192K bytes of packet buffer memory. 65536K bytes of Flash internal SIMM (Sector size 512K). Configuration register is 0x2102 CR1.KJ-Building#sh int g3/3 | inc que Input queue: 0/2000/6399/0 (size/max/drops/flushes); Total output drops: 0 Output queue: 0/40 (size/max) CR1.KJ-Building#sh int g3/11 | inc que Input queue: 0/2000/2648/0 (size/max/drops/flushes); Total output drops: 1401 Output queue: 0/40 (size/max) CR1.KJ-Building#sh int g3/19 | inc que Input queue: 0/2000/10019/0 (size/max/drops/flushes); Total output drops: 120 Output queue: 0/40 (size/max) CR1.KJ-Building#sh int g3/27 | inc que Input queue: 0/2000/9453/0 (size/max/drops/flushes); Total output drops: 0 Output queue: 0/40 (size/max) CR1.KJ-Building#sh int g3/35 | inc que Input queue: 0/2000/51673/0 (size/max/drops/flushes); Total output drops: 0 Output queue: 0/40 (size/max) CR1.KJ-Building#sh int port-channel 10 | inc que Input queue: 0/2000/80352/0 (size/max/drops/flushes); Total output drops: 0 Output queue: 0/40 (size/max) > Date: Fri, 10 Jun 2011 08:38:38 -0400 > From: [email protected] > To: [email protected]; [email protected] > Subject: Re: [c-nsp] Input Queue > > Is this a 6500? Can you output a show ver and a show module? > > Do you also see input queue drops on the physical interfaces? (show > inteface)? > > Do you see high CPU at some times? This would indicate traffic may be > software switched. > > Regards, > John Gill > cisco > > > On 6/10/11 7:46 AM, Mohammad Khalil wrote: > > > > > > > > > > > > hi all > > > > i have etherchannel consisting of 5 G interfaces > > the port-channel is assigned to VLAN 10 (SVI created) > > i cleared the counters on the interface yesterday and today > > Input queue: 0/75/962/962 (size/max/drops/flushes) > > what is the issue ? > > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
