hi all struggle to understand the following: a packet travelled from remote ipsec (tunnel mode) tunnel point to endpoint (hub & spoke tunnel ) source tunnel ip is 1.1.1.1 (wan ip) remote tunnel ip is 1.1.1.2 (wan ip)
tunneling from a remote lan network of 10.10.0.0/24 to 10.0.10.0/24 if i understand correctly in ipsec tunnel mode the packets are encapsulated with new source ip header ; so the above packet will have source ip as 1.1.1.1 and destination as 1.1.1.2 now i if i want to route a specific destination packet to another gateway; ( this static route i will put on the hub router;) so hub router will decrypt the packet and route to next hop; what will be the soruce ip of the packet when it reaches the next gateway; it shud be within any one of 10.10.10.0/24 ? if so when packet comes back it reaches back to 10.0.10.0/24; appreciate some clarities on this -bharathan _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
