Tim Thank you for the tip. I actually took your advice and try to upload the new version 5.1(3)
but I keep getting this crazy error: TFTP get operation failed:connection timed out. I can ping my TFTP server from the switch and i can ping the switch so i know i have two way communication. Have Anyone of you guys ran into this situation or any other machine? On Sat, Jun 11, 2011 at 5:41 PM, Tim Stevenson <[email protected]> wrote: > Hi Renelson, > > My first suspicion would be that these are in fact N7K-M132XP-12L cards > (note the trailing "L"). The "L" version of this card is only supported from > 5.1, I'd recommend 5.1(3). > > Otherwise, I'd open a TAC case, as support for the non-L version is there > from day 1. > > Hope that helps, > Tim > > At 01:39 PM 6/11/2011, Renelson Panosky pronounced: > > I am working on a N7K with two of the above cards. they're showing >> power >> down and everytime i tried to power them back up i got the following >> errors. >> >> switch(config)# 2011 Jun 12 01:22:36 switch %$ VDC-1 %$ >> %PLATFORM-2-PFM_MODULE_POWER_ON: Manual power-on of Module 7 from Command >> Line Interface >> 2011 Jun 12 01:22:39 switch %$ VDC-1 %$ >> %PLATFORM-2-MOD_PWRIDPROM_SW_CARD_ID_UNKNOWN: Module 7 failed to power up. >> (Unknown card. Could not get software-card-id) >> >> I am running Software version 5.0 (2a) and i moved one the card in slot 7 >> and still getting the same error. >> >> >> sho mod >> Mod Ports Module-Type Model Status >> --- ----- -------------------------------- ------------------ >> ------------ >> 1 0 Unknown Module powered-dn >> 2 48 10/100/1000 Mbps Ethernet Module N7K-M148GT-11 ok >> 3 48 10/100/1000 Mbps Ethernet Module N7K-M148GT-11 ok >> 5 0 Supervisor module-1X N7K-SUP1 active * >> 6 0 Supervisor module-1X N7K-SUP1 ha-standby >> 7 0 Unknown Module powered-dn >> Mod Power-Status Reason >> --- ------------ --------------------------- >> 1 powered-dn Unknown card (Could not get software-card-id) >> 7 powered-dn Unknown card (Could not get software-card-id) >> Mod Sw Hw >> --- -------------- ------ >> 2 5.0(2a) 1.7 >> 3 5.0(2a) 1.7 >> 5 5.0(2a) 1.8 >> 6 5.0(2a) 1.8 >> >> Mod MAC-Address(es) Serial-Num >> --- -------------------------------------- ---------- >> 2 50-3d-e5-b3-35-5c to 50-3d-e5-b3-35-90 JAF1502BDGH >> 3 50-3d-e5-b9-81-a0 to 50-3d-e5-b9-81-d4 JAF1502BDGF >> 5 10-8c-cf-1d-e5-d0 to 10-8c-cf-1d-e5-d8 JAF1453BKBK >> 6 8c-b6-4f-e8-ee-60 to 8c-b6-4f-e8-ee-68 JAF1453BKCF >> Mod Online Diag Status >> --- ------------------ >> 2 Pass >> 3 Pass >> 5 Pass >> 6 Pass >> Xbar Ports Module-Type Model Status >> --- ----- -------------------------------- ------------------ >> ------------ >> 1 0 Fabric Module 1 N7K-C7010-FAB-1 ok >> 2 0 Fabric Module 1 N7K-C7010-FAB-1 ok >> 3 0 Fabric Module 1 N7K-C7010-FAB-1 ok >> Xbar Sw Hw >> --- -------------- ------ >> 1 NA 1.1 >> 2 NA 1.1 >> 3 NA 1.1 >> >> Xbar MAC-Address(es) Serial-Num >> --- -------------------------------------- ---------- >> 1 NA JAF1453BPHE >> 2 NA JAF1453BPHH >> 3 NA JAF1453BPAP >> _______________________________________________ >> cisco-nsp mailing list [email protected] >> <https://puck.nether.net/mailman/listinfo/cisco-nsp> >> https://puck.nether.net/mailman/listinfo/cisco-nsp >> archive at <http://puck.nether.net/pipermail/cisco-nsp/> >> http://puck.nether.net/pipermail/cisco-nsp/ >> > > > > > Tim Stevenson, [email protected] > Routing & Switching CCIE #5561 > Distinguished Technical Marketing Engineer, Cisco Nexus 7000 > Cisco - http://www.cisco.com > IP Phone: 408-526-6759 > ******************************************************** > The contents of this message may be *Cisco Confidential* > and are intended for the specified recipients only. > > > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
