What is the configuration difference? --scott
On Thu, Jun 16, 2011 at 10:00 AM, manderson <[email protected]> wrote: > Sounds like you maybe have it set up in client mode vs. network mode > > On Thu, Jun 16, 2011 at 8:26 AM, <[email protected]> > wrote: > > > Date: Thu, 16 Jun 2011 07:45:56 -0700 > > From: Scott Voll <[email protected]> > > To: [email protected] > > Subject: [c-nsp] Newb Question about site to site vpn.... > > Message-ID: <[email protected]> > > Content-Type: text/plain; charset=ISO-8859-1 > > > > I have setup a couple 881's to do a Dynamic site to site vpn tunnel back > to > > my ASA at the head end. > > > > All traffic ends up stopping even thou the tunnel is still up. If I > start > > some traffic from the 881 than the traffic starts working from the head > end > > (ASA side). > > > > What have I missed to get traffic on the ASA side to start passing > traffic? > > With out starting it on the far side (881). > > > > TIA > > > > Scott > > > > > > ------------------------------ > > > > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
