Even it is still the same issue, unregistered. -----Original Message----- From: Daniel Hooper [mailto:[email protected]] Sent: Monday, June 20, 2011 2:31 AM To: ccie; [email protected] Subject: RE: [c-nsp] ATA with CME
I found the firmware load needs to be specified under telephony-server and the image available on your tftp server before it they will register. -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of ccie Sent: Monday, 20 June 2011 1:22 AM To: [email protected] Subject: [c-nsp] ATA with CME Hi experts, Is there any special to define an ASA with CME, I configure Ephone Type asa Mac ..... But still can't see it as registered? Regards, Amin _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
