If you see this happening a lot it could be a HW issue... I would suggest working with TAC on this one. Arie
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Righa Shake Sent: Tuesday, June 21, 2011 13:56 To: [email protected] Subject: [c-nsp] POS Error HI, Am getting the following error on my logs from POS need assistance in making heads of what it means. %CMCC-3-PLIM_STATUS: SIP0: cmcc: A PLIM driver informational error SPA0 L2 protocol field offset past packet EOP, block 1b count 7 Thanks, Righa Shake _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
