Greetings-- I recently installed a stack of HP (H3C) switches in a closet and connected them with an LACP link to a 6513 running 12.2(17d)SXB11a. (Yes, that is circa 2006, don't ask. At least the beast wasn't running in hybrid mode!) The 6513 physical LAG ports were configured with "mode active".
When using static LAG on the HP switches the 6513's CPU utilization climbed so high that packets were dropping and a "sh run int po2" would not complete. When I moved to using dynamic LAG on the HP switches, the uplink worked just fine. Anyone heard of such an issue specific to static LAG, or perhaps an issues with a sub-optimal version of IOS. cjw _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
