Or use Kron instead of EEM. http://www.cisco.com/en/US/docs/ios/12_3/feature/guide/g_kron.html
Cheers, -Aaron. -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Arie Vayner (avayner) Sent: Wednesday, 6 July 2011 7:00 AM To: Mohammad Khalil; [email protected] Subject: Re: [c-nsp] scheduled command event manager applet EVEN-MINUTE event timer cron name EVEN-MINUTE cron-entry "0,10,20,30,40,50 * * * *" action 1.0 cli command "enable" action 2.0 cli command "command 1" ! event manager applet ODD-MINUTE event timer cron name ODD-MINUTE cron-entry "5,15,25,35,45,55 * * * *" action 1.0 cli command "enable" action 2.0 cli command "command 2" -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Mohammad Khalil Sent: Wednesday, July 06, 2011 01:11 To: [email protected] Subject: [c-nsp] scheduled command hi i want to be able to apply a command for example each 5 minutes , the next command 5 minutes i want to remove it , the next 5 minutes apply it again and so on the command is from the global mode what is the best way to accomplish this ? Thanks _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
