> I got a 6506 with WS-X6K-S2U-MSFC2 here running 12.2(18)SXF17 > (ADVENTERPRISEK9_WAN). Basically everything the device does is some > basic routing between a couple of vlans and some PAT for our internet > connection. Now we got a new provider where we don't have a static IP > address anymore and I wanted to use the device as dhcp client but I > have neither 'ip address dhcp' nor 'ip dhcp client' commands on the > ethernet interfaces (FE interfaces on WS-X6348-RJ-45 and GE interfaces on > WS-X6548-GE-TX).
Those are LAN cards / switch ports, so I believe you're going to need the command on the VLAN interface, not the physical port. Regards, Tim. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
