On Thu, 7 Jul 2011, Emmanuel Amamoo wrote:
Hi All...Am totally new at STM-1 conversion to DS3 on a cisco box and will like some help. My 7200VXR is configured as below: 1 x PA-POS-OC3SMI= on slot 0 1 x PA-MC-T3= on slot 1 2xPA-2CT3= on slot 2 and 3 I am receiving a voice circuit channelized on an STM-1 from provider and i must demultiplex it to the DS3 interfaces which will be delivered to Cisco AS5400 voice routers so i can deliver to SIP gateway. Any assistance will be appreciated.
It doesn't work, 7200 isn't an SDH/SONET switch, it can't do TDM subchannel switching (it can only terminate packets there, not TDM). Also, the PA-POS/OC3SMI is concatenated only, so no channelizing at all.
-- Mikael Abrahamsson email: [email protected]
_______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
