On Mon, 2011-07-11 at 18:30 +0100, James Bensley wrote:
> Group Port-channel Protocol Ports
> ------+-------------+-----------+-----
> 2 Po2(SU) LACP Gi0/45(P) Gi0/46(P)
> 3 Po3(SD) PAgP Gi0/13(D) Gi0/14(I)
> 4 Po4(SD) PAgP Gi0/15(I) Gi0/16(I)
>
> Channel 2 is clearly up and running, but I don't understand the output
> of 3 and 4. D means down which is simple enough ('show ip int br'
> confirms Gi0/13 is down). I means 'stand-alone'. Its this that I can't
> find out, what does 'stand-alone' mean and why would these ports say
> that? Can anyone here explain why?
The "I" means "independent" here. It means that you configured an
etherchannel protocol on this devices, but the neighboring device is
running the same protocol. What's the interface configuration on this
and the neighboring device?
--
Peter
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
