Hi, On Sun, Jul 17, 2011 at 01:38:16PM -0500, cisco-pe wrote: > Is it possible to use two different supervisor in one 7609? (WS-720-3B and > RSP 720-3C) > At this moment we are using a number of 7609 with only one supervisor > (WS-720-3B), and we want to implement HA using a second supervisor (RSP > 720-3C).
Can't answer that bit, sorry. (It might work, and fall back to "3B"
capabilities - but very likely TAC will tell you "this is unsupported",
and quite likely, IOS will just crash).
If you have multiple routers anyway, I'd just move half the routers
to dual-RSP720 and the Sup720-3B that are no longer in use there can be
used in the other half for dual-Sup720-3B setups...
> Another question: We are using the GE port on the main supervisor for the
> Uplink connection, if we use the GE interface on the second supervisor, is
> it possible to use this link to implement load balancing ?
> Or this link only will be active when the supervisor change from stand-by to
> active??
On a 6500/7600 with (supported - see above :) ) dual supervisors, all
ports can be used.
gert
--
USENET is *not* the non-clickable part of WWW!
//www.muc.de/~gert/
Gert Doering - Munich, Germany [email protected]
fax: +49-89-35655025 [email protected]
pgpH9uyPwqgV7.pgp
Description: PGP signature
_______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
