On Mon, 2011-07-18 at 08:19 +0300, [email protected] wrote: > Please share your config and dir command for your flash, it's probably > related to the location of the image file.
Hmm... It's sad that when Vinny actually took precautions to avoid answers like these they still appear. Please re-read the original mail. On Sun, 2011-07-17 at 23:58 -0400, Vinny Abello wrote: ... > I know what everyone is going to say, your config registers aren't set > properly... Well, yes they are. I've verified the config register > being 0x2102 a dozen times now and even reset it a few times to be > sure. The odd thing about this is if I simply reboot it again, it > starts fine. Even if I power cycle it with the rocker switch it boots > up fine. I literally cannot reproduce the problem by powering it off > and back on, yet every time there is a power failure, it fails to load > IOS and a reboot is the quick fix. ... I can't see how configurations details would help. Unless this is a "feature" of course. I'm afraid I have nothing to add to the problem itself though. -- Peter _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
