Hi Everyone, I am hoping that someone can give me some guidance with how to setup VRF-Lite and routing with BGP and intra-vrf routing. I have been playing with this for about a week now and figured out how to setup vrf-lite to a certain point. I know if I apply the ip vrf xx to an interface such as physical, loopback, or vlan I can pass traffic up or down it on the same vrf, including if I set the vrf on an interface going outbound to a BGP peering neighbor I can pull in their bgp announcements to that vrf, but what I am having problems with is can this be done via the Global BGP routing table? Or can I somehow do a Global Leak so that the VRF can communicate out of its area to the remote peer?
I hope I am clear here, if not I will be happy to share my testing configuration. Basically we are wanting to separate 2 networks so that they have their own BGP Routing tables so they have different routes out but at the same time be able to communicate between all of the local networks the router has installed on it. Thanks Joe _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
