You might be able to figure it out with "show ip cache verbose flow" which requires you to enable "ip flow ingress" on the interfaces in question... You will see in there a byte for TOS. You might be able to infer from this how the traffic is getting marked/classified and thus what queue it egresses...
Derick Winkworth CCIE #15672 (RS, SP), JNCIE-M #721 http://blinking-network.blogspot.com --- On Thu, 7/28/11, Muhammad Atif Jauhar <[email protected]> wrote: From: Muhammad Atif Jauhar <[email protected]> Subject: [c-nsp] QoS question To: [email protected] Date: Thursday, July 28, 2011, 1:15 PM Hi All, I am new to QoS technology. I have one question: I have below connectivity and configuration example: Client -- Switch-1 -- Router-1 --- Router-2 --- Network Cloud --- Server Router-1 & Router-2 are managed by me. Switch-1 is not managed by me. Router-1 has configured for QoS marking on interface with Switch-1 and Bandwidth management QoS configuration is configured on interface with Router-2. In Router-1 we didn't marking traffic from Client to Server in QoS configuration. I have question: Is there any way in Router-1 or Router-2 to observe traffic from Client toward Server is come under which QoS queue. -- Regards, Muhammad Atif Jauhar (+60-10-2155076) _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
