Hello, my name is Lucien and I try to find a solution for the following issue. Actually I have Ipsec Site-to-Site and Remote Access VPN´s from Cisco ASA to ASA and IOS Router to Cisco ASA running very well with IPv4.
Now I want try this setup with IPv6 to transport IPv4 and / or IPv6 Traffic over a IPv6 Ipsec Tunnel. I tested successfully this setup with a Site-to-Site setup with ASA-ASA and IOS-Router-ASA. But I can't find a solution to establish that with the Remote-Access setup from IOS-Router to a Cisco ASA. Normally when the ISP assign to the CPE side a fixed IPv6 Prefix this setup will changed to a site-to-site config but my problem is now how can I realize that when the CPE got no fixed IPv6 Prefix and it will changed. Can anyone help on this topic? Many Many Thanks and Best Regards Lucien _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
