You need to monitor 'sh proc mem sorted' over time and see which
allocating process keeps going up.
For reference:
http://www.cisco.com/en/US/products/sw/iosswrel/ps1831/products_tech_note09186a00800a6f3a.shtml#tshoot2
Then based on that we'll have to determine if it's a bug based on which
function in the code is allocating the blocks of memory and them not
getting freed back.
Rodney
On 8/1/11 1:54 PM, Brian Roche wrote:
ever since upgrading to 12.2(33)SCD5 on my ubr7246vxr i've noticed
that my free processor pool memory (from sh proc mem) decreases over
time. for example last week i had 44527612 free 4 hours after a reload
and 8 days later it is 31347880. any ideas if this is normal or the
best way to troubleshoot this? thanks
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
