Hello, I'm looking for information on configuring ISIS on cisco 6500/Sup720-3BXL:
I have two Cisco 6500/Sup720-3BXL connected by Layer 2 link of 1 Gbit. My config: C6500-1: interface GigabitEthernet1/2 mtu 2000 ip address 192.168.100.1 255.255.255.252 ip router isis speed nonegotiate mpls label protocol ldp tag-switching ip clns mtu 1500 router isis net 49.0001.0000.0000.0424.00 is-type level-2-only metric-style wide redistribute connected C6500-2: interface GigabitEthernet3/2 mtu 2000 ip address 192.168.100.2 255.255.255.252 ip router isis speed nonegotiate mpls label protocol ldp mpls ip router isis net 49.0001.0000.0000.0421.00 is-type level-2-only metric-style wide redistribute connected ! Soon, I will add a new link between the two for backup. This link is on port Gigabit but there are only 100 Mbits of Commit I would like the cisco C6500 use it only on the 1 Gb link does not work more. I will add in config: C6500-1: interface GigabitEthernet1/3 mtu 2000 ip address 192.168.50.1 255.255.255.252 ip router isis speed nonegotiate mpls label protocol ldp tag-switching ip clns mtu 1500 C6500-2: interface GigabitEthernet3/3 mtu 2000 ip address 192.168.50.2 255.255.255.252 ip router isis speed nonegotiate mpls label protocol ldp mpls ip How can I do to make it a priority is having an link compared to another? Thank you in advance Olivier _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
