Do you have this line on the top part of your running-config ?
mls qos QoS will not work without it. I've done the same error. J-E Le 2011-07-29 11:40, Nikolay Shopik a écrit :
I'm trying to configure service policy on interface but it seems not working at all. While same config working on old 2950. Here is sample of it. 2960 running on 12.2(55)SE3. Any ideas? policy-map 10Mbit class class-default police 10000000 512000 exceed-action drop interface FastEthernet0/4 switchport access vlan 4 spanning-tree portfast service-policy input 10Mbit And output of command show policy-map int. show policy-map int FastEthernet0/4 Service-policy input: 10Mbit Class-map: class-default (match-any) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any 0 packets, 0 bytes 5 minute rate 0 bps Before this config I did tried configure it with access-list with same result, so I trying just match anything. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
