Ambedkar Podeti wrote: >> > RSM_6509_1#sh boot >> > BOOT variable = bootflash:c6msfc2-jsv-mz.121-19.E1.bin,12 >> > CONFIG_FILE variable does not exist >> > BOOTLDR variable = bootflash:c6msfc2-jsv-mz.121-19.E1.bin >> > Configuration register is 0x2102 >> >> It appears you're running your sup2/msfc2 on hybrid mode. Does the >> system boot if you point the BOOTLDR image to an actual bootloader image >> (c6msfc2-boot-mz.NNN-NN.XX) instead of the IOS image the variable >> currently points to? > > yeah, the switch portion is running on CATOS and router portion is > running on CISCO IOS. presently both boot variable and bootldr > variable pointing towards the same IOS.
Does the system boot if you copy the bootloader image on the bootflash and point the BOOTLDR variable to it (boot system bootldr bootflash:bootldr-image). I have no hybrid boxes anymore so I cannot test that. I just remember the bootloader image was required when running hybrid but I may be mistaken. -- - Matti - _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
