Hello! We have a problem with exporting netflow from WS-X6704-10GE (with DFC3CXL) line cards. ICAM used for 99% and TCAM not used.
#sh mls netflow table-contention summary Earl in Module 2 Summary of Netflow CAM Utilization (as a percentage) ==================================================== TCAM Utilization : 1% ICAM Utilization : 99% Netflow Creation Failures : 131564 Netflow CAM aliases : 0 In the same router netflow export from SUP720 module is ok. #sh mls netflow table-contention summary Earl in Module 6 Summary of Netflow CAM Utilization (as a percentage) ==================================================== TCAM Utilization : 15% ICAM Utilization : 0% Netflow Creation Failures : 0 Netflow CAM aliases : 0 #sh module 2 4 CEF720 4 port 10-Gigabit Ethernet WS-X6704-10GE 6 5 Supervisor Engine 720 10GE (Active) VS-S720-10G 2 Distributed Forwarding Card WS-F6700-DFC3CXL SAL1435SBR6 1.1 Ok 6 MSFC3 Daughterboard VS-F6K-MSFC3 SAL1228X2TX 1.0 Ok #sh ver Cisco IOS Software, s72033_rp Software (s72033_rp-ADVIPSERVICESK9_WAN-M), Version 12.2(33)SXI4a, RELEASE SOFTWARE (fc2) cisco WS-C6506-E Have tried software upgrade from SXI4a to SXH7, problem still existed. #sh run | i mls mls aging fast time 8 threshold 3 mls aging long 480 mls aging normal 32 mls netflow interface mls netflow usage notify 80 120 mls flow ip interface-full mls nde sender version 5 mls qos mls cef error action reset Do you have any idea? Stas Bakulin ---------------------------------------------------------------------- www.kvant-telecom.ru _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
