Hi all, I just ran into an unusual problem when deploying some QoS onto a 7606 in my network. I was configuring all ports to trust DSCP input, and after applying the command to all the physical ports, I went to apply it to my the port-channels. Shortly after I did, IS-IS went down (timeout) on the L3 links across those port-channels. IS-IS came back when I removed the trust DSCP command. I've done some searching around and can't find any reference to this feature/bug/wtf anywhere. Does anyone have any knowledge about why this would happen?
Here's my PO config: interface Port-channel1 switchport switchport trunk encapsulation dot1q switchport trunk allowed vlan 200 switchport mode trunk mtu 9216 load-interval 30 service-policy input SONIC-DEFAULT-QOS And the command I entered was "mls qos trust dscp". Thanks -Jared _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
