Hi Terence, Martin,
err-disabled is indeed a plausible possibility, but IIRC, it should visible from a show int in the form: switch# sh int Gi1/0/7 GigabitEthernet1/0/7 is down, line protocol is down (err-disabled) and the sh int status that Martin did should have showed it, which was not the case: Port Name Status Vlan Duplex Speed Type Gi0/24 -> Brocade connected trunk a-full a-1000 1000BaseLX SFP Useful commands - sh int status err-disabled - sh log | i BPDU|err-disable Cisco doc: http://www.cisco.com/en/US/tech/tk389/tk621/technologies_tech_note09186a00806cd87b.shtml regards, -pierre. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
