Hi, that's interesting because I think that's how the example in the using
QOS and PBR section of the cisco site is set up that I used as a template.
I'll just remove the permit 30 statement as detailed in a previous response
and give that a wack. I have a test unit so should be able to fiddle around
with the config to get it to work for me correctly.
Thanks for the pointers.
-----Original Message-----
From: Gert Doering
Sent: Thursday, August 11, 2011 2:37 AM
To: Scott Granados
Cc: [email protected]
Subject: Re: [c-nsp] ip local policy (PBR routing question)
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
