Hi all
I'll appreciate if someone could give me a hint how to setup a ACE4710.
I have a problem regarding RMI calls.
The vendor would like to install 4 serveres with 4 incarnations of the same
application.
Say fram tcp port 8001 to 8004.
The client software calls port 8003, so the balancer has to translate the
destination port when balancing. Beyond that the client also calls a rmi
portrange.
Setting up the port src nat is straight forward I guess.
But how to I control the rmi calls, will stikiness be able to do this based on
the scr addr ?
Do I need an entry more class map pointing out the tcp protocol ?.
Config .:
rserver host TEST1
ip address 10.1.1.1
inservice
rserver host TEST1
ip address 10.1.1.2
inservice
rserver host TEST1
ip address 10.1.1.3
inservice
rserver host TEST1
ip address 10.1.1.4
inservice
serverfarm host TEST_FARM
rserver TEST1 8001
probe TCP-8001
inservice
rserver TEST1 8002
probe TCP-8002
inservice
rserver TEST1 8004
probe TCP-8004
inservice
rserver TEST2 8001
probe TCP-8001
inservice
rserver TEST2 8002
probe TCP-8002
inservice
rserver TEST2 8004
probe TCP-8004
inservice
rserver TEST3 8001
probe TCP-8001
inservice
rserver TEST3 8002
probe TCP-8002
inservice
rserver TEST3 8004
probe TCP-8004
inservice
rserver TEST4 8001
probe TCP-8001
inservice
rserver TEST4 8002
probe TCP-8002
inservice
rserver TEST4 8004
probe TCP-8004
inservice
sticky ip-netmask 255.255.255.255 address both TEST1_STIKY
replicate sticky
serverfarm TEST1_FARM
class-map match-any VIP_TEST_1
10 match virtual-address 10.1.1.1 tcp eq 8003
## < 20 match virtual-address 10.1.1.1 tcp > ##
policy-map type loadbalance first-match TEST1_POLICY
class class-default
serverfarm TEST1_FARM
!
policy-map multi-match VIP_ORACLE_POLICY
class VIP_TEST_1
loadbalance vip inservice
loadbalance policy TEST1_POLICY
loadbalance vip icmp-reply
/Arne
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
