Hi Guys, After some advice on asr's,glbp+3750x's We currently have
7200's(LNS,MP-BGP,Inet, client tails etc(i.e. P/PE)) with G2's that are doing
~350Mb/sec(Our utilisation has increased dramatically over the last
6months)...we have "failover" 7200's ready to take over should the G2 7200's
fail....unfortunately the failover 7200's only have npe400's in them, and would
melt should they be needed. Therefore, we are looking at replacing the 7200's
with ASR's, and also implementing a more robust switching infrastructure(i.e. 2
x 3750x stack) Having no experience with GLBP can it be used like so: 2 x ASRs
running GLBP (The ASR's will be doing the same role as the existing 7200's),
each one connected to both 3750x's via Portchan - We then have stacks of
2x2960S's as client facing switches, with portchan running from both
2960s->both 3750s.
Hoping that with the above, both asr's will be active/active(So we dont have
one sitting idle waiting for a failure), we can lose an asr, and experience
minimal interruption, we can also lose a 3750 and also experience minimal
interruption. Will this work? Thanks in advance.
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
