Manu, On Wed, 2011-08-17 at 05:58 +0200, Manu Chao wrote: > I m looking for SNMP 6500 interface CRC input error OID. > Which MIB should i use?
As far as I can see, this counter isn't available via SNMP. You could try if one of the following objects suits your needs: * IF-MIB::ifInErrors is a generic input error counter, which also increments when CRC errors occur. * Several low-level error counters are available in the EtherLike-MIB; eg look at EtherLike-MIB::dot3StatsAlignmentErrors, EtherLike-MIB::dot3StatsFCSErrors and EtherLike-MIB::dot3StatsSymbolErrors. Regards, Jeroen van Ingen ICT Service Centre University of Twente, P.O.Box 217, 7500 AE Enschede, The Netherlands _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
