I had a few requests to see if this worked. We had this error message each morning as the multicast sources came up:
> > We are running into the following error on a Nexus 3k: > > > > %IPFIB-2-FIB_MCAST_LIMIT_REACHD: Multicast Route Limit Exceeded. But after raising the limit with the command below we no longer receive the error. > > I can't seem to figure out what show commands exist, if any, to see what the > > current limit is. Any ideas? > > # show hardware profile status > Reserved LPM Entries = 1024. > Reserved Host Entries = 1952. > Reserved Mcast Entries = 2048. > Used LPM Entries = 78. > Used Host Entries in LPM = 0. > Used Mcast Entries = 263. > Used Host Entries in Host = 126. > > Supposedly we can adjust this with: > > hardware profile multicast max-limit And yes, I'm aware the N3k is brand new, hence the lack of results in Google searches. I'll be sending through our diffs for nxrancid shortly too. cheers Marty _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
