I copied the config before i upgraded to make sure i would catch any
config changes. I've double, triple and quadruple checked my config for
anything that may have changed or got added.
only logging a few acl entries which deal with spoofing our ip ranges.
But i'm not seeing any hits from the in the log.
On 8/22/2011 3:36 PM, Edward Salonia wrote:
Did you double check your config to dee if anything changed or got removed and
subsequently saved after your attempt to upgrade to 15M? Sometimes
commands/santax changes slightly between versions and a part of your config may
not have been carried over.
I have also seen situations where one makes changes to a config and forgets to
save it. Then a few days/weeks/months down the road, they reboot for one reason
or another (sw upgrade for example) and suddenly the change they made
previously is gone and no one notices because it was made so long ago and
forgotten.
Just a thought. Double check you config.
I see you made sure CEF was enabled.
Another thought, do you have 'log' attached to the end of any ACL's?
- Ed
-----Original Message-----
From: Chris Gotstein<[email protected]>
Sender: [email protected]
Date: Mon, 22 Aug 2011 15:08:23
To:<[email protected]>
Subject: Re: [c-nsp] 7206VXR NPE-G1 Upgrade from 12.4 to 15.0 High CPU
Backed down to SRE, but still seeing high utilization on the IP Input
process. Have no idea why this is happening now, thought it was due to
the upgrade to 15.0. But seeing same issue back on SRE. Anything i can
do to troubleshoot? Running out of ideas.
On 8/22/2011 12:21 PM, Chris Gotstein wrote:
Was looking for the additional IPv6 support in the 15.x train. Can't
find any solution to the problem, so i'll probably just move back down
to SRE4.
On 8/22/2011 8:09 AM, Mark Tinka wrote:
On Monday, August 22, 2011 05:18:10 PM Chris Gotstein wrote:
Any ideas of what could be going on? I haven't
downgraded the IOS just yet, hoping to see if i might
have missed something easy. Thanks,
Don't know anything about how 15.x works on the NPE-G1/G2,
but we're staying away from it as it doesn't have any
features we need. SRE4 is nice and happy.
Mark.
--
---- ---- ---- ----
Chris Gotstein, Network Engineer, U.P. Logon/Computer Connection U.P.
http://uplogon.com | +1 906 774 4847 | [email protected]
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
