Hi, I have what is probably a simple question, however, my first occasion of working with new nat config on an asa running 8.3.
I have defined dynamic source nat rule: Here is the relevant config: object network obj-10.201.0.0 subnet 10.201.0.0 255.255.0.0 object network obj-2.2.2.102 host 2.2.2.102 nat (inside,outside) source dynamic obj-10.201.0.0 obj-2.2.2.102 What i am looking to do, if possible (i believe it should be) is do a static mapping from the outside of 2.2.2.102:80 to a single ip address in the 10.201.0.0/16 net, for ex 10.201.10.10:80 I'm guessing the syntac would be similar to: 1) add object object network obj-10.201.10.10 host 10.201.10.10 2) Then add the manual nat rule nat (outside,inside) source static obj-2.2.2.102 obj-2.2.2.102 destination static obj-10.201.10.10 obj-10.201.10.10 Is that correct? Also, what is the syntax for mapping only port 80 of obj-2.2.2.102 to obj-10.201.10.10? so, obj-2.2.2.102 port 80 to obj-10.201.10.10 port 80 Any help or tips appreciated! Thanks alot! -dalton _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
