We have a 6513 in our network with 2x Catalyst 6000 Sup 2 engines running in SSO (Active, Standby Hot). The supervisors are currently in slot 1 and 2.
We would like to replace the supervisors with 2x WS-SUP720-3B in SSO mode. These sups are required to be inserted into slots 7 and 8. I have looked around on the cisco site and have found procedures for upgrading IOS on redundant supervisors but am unable to find procedures on upgrading supervisor engines themselves? Can anyone point me in the right direction? Thank You Switch#show module Mod Ports Card Type Model Serial No. --- ----- -------------------------------------- ------------------ ----------- 1 2 Catalyst 6000 supervisor 2 (Hot) WS-X6K-SUP2-2GE 2 2 Catalyst 6000 supervisor 2 (Active) WS-X6K-SUP2-2GE Switch#show vers ....... IOS (tm) c6sup2_rp Software (c6sup2_rp-JK9S-M), Version 12.2(18)SXD5, RELEASE SOFTWARE (fc3) ROM: System Bootstrap, Version 12.1(4r)E, RELEASE SOFTWARE (fc1) BOOTLDR: c6sup2_rp Software (c6sup2_rp-JK9S-M), Version 12.2(18)SXD5, RELEASE SOFTWARE (fc3) _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
