On 05/09/11 15:40, Jon Lewis wrote:
[from show platform hardware capacity]
L3 Forwarding Resources
FIB TCAM usage: Total Used %Used
72 bits (IPv4, MPLS, EoM) 622592 368412 59%
144 bits (IP mcast, IPv6) 212992 7041 3%
FIB TCAM usage: Total Used %Used
72 bits (IPv4, MPLS, EoM) 262144 20 1%
144 bits (IP mcast, IPv6) 131072 8 1%
288 bits (IPv6 mcast) 65536 1 1%
This is a non-XL sup2T. So, identical to a non-XL sup720 IIRC.
Presumably the XLs have the same specs.
As IPv4 runs out, I suspect we're going to see continued, if not
explosive, IPv4 routing table growth, and I'll be very disappointed if
cisco didn't engineer the Sup2T to support more routes than all previous
models. If not, hopefully there's some more capable PFC/DFC on the way,
Nope.
or maybe cisco just wants to eventually stop people from using the 6500
platform as a full BGP router and sell more ASRs or something.
ASR9k, one suspects.
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
