That looks like it will work, thank you all for the replies. I'll give it a try.
Dave -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Saku Ytti Sent: Tuesday, September 06, 2011 11:47 AM To: [email protected] Subject: Re: [c-nsp] VRF Selection based on IP On (2011-09-06 11:03 -0500), Dave Weis wrote: > Does anyone have a suggestion on how to implement VRF selection based on > incoming IP on a 7200? > > http://www.cisco.com/en/US/docs/ios/12_0s/feature/guide/vrfselec.html This is the old config, it is almost useless as you cannot have overlapping addressing. Unfortunately some platforms like NSE100 only support this config mode. New config is done via PBR: http://www.cisco.com/en/US/docs/ios/12_2sr/12_2srb/feature/guide/srb2mvrf.html -- ++ytti _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
