Hi , Thanks for the reply
the problem with the VRF solution is that one subnet is attached to a Cisco
ME3750 and the other is connected to a non cisco device which does not
recognize VRF
> Subject: Re: [c-nsp] Traffic Control
> From: [email protected]
> To: [email protected]
> CC: [email protected]
> Date: Thu, 8 Sep 2011 07:50:35 +0200
>
> Hi Mo,
> Depends on where Subnet A & B are physically attached...
> If they are on different (sub) interfaces you can always use
> VRF-lite...quick and easy and very secure...
>
> If not, I think policy routing is your friend...
>
> On Wed, 2011-09-07 at 23:13 +0300, Mohammad Khalil wrote:
> > Hi , i have 2 subnets
> > subnet A is assigned to servers connected to Router A
> > and subnet B is assigned to a Leased Line connection terminated to Router B
> > (Internet connection)
> > i want to control subnet B in a fashion just to access subnet A (dont
> > access the internet)
> > what is the best way to accomplish this?
> >
> > Thanks
> >
> > _______________________________________________
> > cisco-nsp mailing list [email protected]
> > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > archive at http://puck.nether.net/pipermail/cisco-nsp/
>
> --
> Kind Regards
>
> JC Cockburn
>
>
>
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
