I have Zones for both inside self and outside self Scott
On Mon, Sep 12, 2011 at 1:38 PM, Hughes, Scott GRE-MG <[email protected]>wrote: > Did you setup any zone-pairs involving the 'self' zone? If you don't use > self zones, no additional configuration should be necessary for DHCP > packets. > > > > On Sep 12, 2011, at 9:43 AM, "Scott Voll" <[email protected]> wrote: > > > So I'm setting up a GRE IPSEC tunnel as my backup link with a 2821. I > have > > also setup ZBFW on the outside interface. So far so good. > > > > BUT now the outside interface will not get a DHCP address from the ISP. > How > > do I allow the Router to get a DHCP address? Did I miss something on the > > ZBFW config? Or can this not be done? > > > > TIA > > > > Scott > > _______________________________________________ > > cisco-nsp mailing list [email protected] > > https://puck.nether.net/mailman/listinfo/cisco-nsp > > archive at http://puck.nether.net/pipermail/cisco-nsp/ > > > NOTICE TO RECIPIENT: The information contained in this message from > Great River Energy and any attachments are confidential and intended > only for the named recipient(s). If you have received this message in > error, you are prohibited from copying, distributing or using the > information. Please contact the sender immediately by return email and > delete the original message. > > > > > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
