According to Cisco's docs on the 6500/7600 chassis, you can mix and match supply wattages (as long as the supplies meet the minimum requirements of the supervisor), and also mix AC and DC supplies. Of course if you have a mismatched pair running in a redundant configuration, then if the larger supply fails you will only have the lower wattage of the smaller supply available..
--- Howard Leadmon -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of omar parihuana Sent: Wednesday, September 21, 2011 8:22 PM To: [email protected] Subject: [c-nsp] 7600 DC Power Supply Mix.... Hi list... Quick question... is it possible to use one power supply 2500W and other 4000W both DC in the same chassis 7609? Rgds. -- Omar E.P.T ----------------- Certified Networking Professionals make better Connections! _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
