YEs I saw this...but on the congestion management side (WTD), how to properly set the buffer size and threshold? what's the basis? I believe reference is not the port speed. But rather the Stack ring (internal bus). Im confused what will be the reference here.
thanks --- On Thu, 9/22/11, Joakim Sara <[email protected]> wrote: From: Joakim Sara <[email protected]> Subject: Re: [c-nsp] 3560 Switch Traffic policing/shaping To: [email protected] Date: Thursday, September 22, 2011, 4:10 PM we use this for egress shaping on customer interfaces srr-queue bandwidth shape weight1 weight2 weight3 weight4 srr-queue bandwidth shape 11 11 11 11 interface speed / weight 1000 / 11 = 90,90909090.... _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
