29.09.2011 20:22, Alexander Fossa wrote:
On the NPE-G1
interface GigabitEthernet0/1
description Link to BabyBoy1/1
mtu 9216
no ip address
duplex full
^^^^^^^^^^^^^^^
speed 1000
^^^^^^^^^^^^^^^
media-type rj45
no negotiation auto
no cdp enable
hold-queue 1500 in
end
From the SUP32
interface GigabitEthernet1/7
description DSL1.THE_GI0/1
switchport
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 89
switchport mode trunk
mtu 9216
no cdp enable
no mop enabled
no mop sysid
end
Try to set speed and duplex on both sides the same way.
--
Sincerely yours,
Artyom Viklenko.
-------------------------------------------------------
[email protected] | http://www.aws-net.org.ua/~artem
[email protected] | JID: [email protected]
FreeBSD: The Power to Serve - http://www.freebsd.org
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
