On 04/10/2011 07:38, Manaf Al Oqlah wrote: > Normal Configuration: > > interface GigabitEthernet5/2 > ip address x.x.x.x > no ip redirects > no ip proxy-arp > media-type rj45 > > MTU is default 1500
The GE ports on a VS-S720-10G-3C supervisor are each provisioned with 9.6MB RX and 8.1MB TX buffers. This is quite a respectable amount of buffer space for a GE port, although if you have mls qos enabled, the default TX configuration is 1p3q4t, configured as: SP: 1.2MB Q3: 1.2MB Q2: 1.6MB Q1: 4.1MB This may not suit your traffic profile if everything is in a default priority class, as you'll end up putting everything into q1. reference paper: > http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps708/prod_white_paper09186a0080131086.html Nick _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
