Hi All, I am running 12.2(18)SXF12a on a Cisco 6500 and I am getting the following error message when applying a service policy to an interface:
%QM-4-AGG_POL_EXCEEDED: QoS Hardware Resources Exceeded : Out of Aggregate policers I understand the EARL7 SUP720 has a limit of 1023 aggregate policers, but I have not configured any policers (aggregate or flow based). My service policy is very simple and it is setting dscp based on ACL matches: policy-map X class AAA set dscp cs6 class BBB set dscp af32 class CCC set dscp cs3 >From what I can see, I am using an aggregate entry for each class attached to an interface: Switch# show mls qos ip GigabitEthernet 2/7 Int Mod Dir Class-map DSCP Agg Trust Fl AgForward-By AgPoliced-By Id Id ------------------------------------------------------------------------------- Gi2/7 5 In AAA 48 193 No 0 0 0 Gi2/7 5 In BBB 26 194 No 0 0 0 Gi2/7 5 In CCC 24 195 No 0 0 0 Gi2/7 5 In DDD 18 196 No 0 6338085 0 Is it just a case that the error message is misleading and I can only use 1023 classes across the box or is this not expected? I know my solution is vlan based and I am going to need to move to that, but just checking this is expected and this limit isn't just policers. Thanks, Chris _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
