If all you want is to do basic traffic policing, you could set up an aggregate policer and assign this to all port members of your Vlan. 2960 can only do ingress policing (not shaping, or egress shaping/policing) per port.
2011/10/7 Tóth András <[email protected]> > Hi Righa, > > Vlan-based QoS is not supported on Catalyst 2960 switches. > > Best regards, > Andras > > > On Fri, Oct 7, 2011 at 7:08 PM, Righa Shake <[email protected]> wrote: > > Hi, > > > > Am looking at bandwidth shaping per VLAN on a 2960 Cisco Switch as > opposed > > to doing it per port. > > > > Regards, > > Righa Shake > -- Alex Presse "How much net work could a network work if a network could net work?" _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
