yes. here you are Thank you
*Mar 1 00:39:05.759: %SYS-5-CONFIG_I: Configured from console by consolen Cisco Internetwork Operating System Software IOS (tm) 3700 Software (C3725-I-M), Version 12.3(6e), RELEASE SOFTWARE (fc3) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2005 by cisco Systems, Inc. Compiled Fri 01-Apr-05 09:41 by h Image text-base: 0x60008AF4, data-base: 0x60D94000 ROM: System Bootstrap, Version 12.2(8r)T2, RELEASE SOFTWARE (fc1) ROM: 3700 Software (C3725-I-M), Version 12.3(6e), RELEASE SOFTWARE (fc3) r uptime is 39 minutes System returned to ROM by power-on System image file is "flash:c3725-i-mz.123-6e.bin" cisco 3725 (R7000) processor (revision 0.1) with 252928K/9216K bytes of memory. Processor board ID FTX0931A338 R7000 CPU at 240MHz, Implementation 39, Rev 3.3, 256KB L2 Cache Bridging software. X.25 software, Version 3.0.0. 2 FastEthernet/IEEE 802.3 interface(s) DRAM configuration is 64 bits wide with parity disabled. 55K bytes of non-volatile configuration memory. 31360K bytes of ATA System CompactFlash (Read/Write) Configuration register is 0x2102 On Fri, Oct 7, 2011 at 6:13 PM, Javier Henderson <[email protected]> wrote: > > > On Oct 7, 2011, at 4:37 PM, Deric Kwok <[email protected]> wrote: > >> Thank you >> >> but I can't find encapsulation command ! > > Can you post the output of "show version" please? > > -jav > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
