If memory serves correctly, an Adran OPTI may be a good choice, if
you're looking to split a OC-3 out into DS-3's or some smaller tdm
denomination. You'd then have to plug those DS3's into a relevant
module for your router. I'm not sure if these have a CLI that is
rancid-friendly if that happens to be a concern.
--
Walter Keen
Network Engineer
Rainier Connect
Office: 360-832-4024
Cell: 253-302-0194
On 10/18/2011 01:38 PM, randal k wrote:
Hive Mind,
We're terminating an army of T1s in various locations on multiple DS3s, and
are looking at consolidating a couple key points into OC3s. However, it
seems like there is no channelized PA for 7206s, which are our preferred
platform for this kind of thing. It also seems that there isn't a suitable
NM for th 38xx or 39xx, either. Recommendations on a way to terminate these
Ts? Thinking Adtran OPTI-3, but we're an all Cisco shop with very little
Adtran experience. If I missed something, please let me know - all input is
appreciated.
Thanks!
Randal
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
