I need to add a port channel with L3 sub interfaces to a 6509 with a SUP720. Here's the code and a sh mod from the box. This isn't explicitly in the feature navigator. Is this not supported at all or do I just need a different code version or feature set.
s72033_rp Software (s72033_rp-IPSERVICESK9_WAN-M), Version 12.2(33)SXH3a, RELEASE SOFTWARE (fc1) Mod Ports Card Type Model Serial No. --- ----- -------------------------------------- ------------------ ----------- 1 24 CEF720 24 port 1000mb SFP WS-X6724-SFP 5 2 Supervisor Engine 720 (Active) WS-SUP720-3B 6 2 Supervisor Engine 720 (Hot) WS-SUP720-3B Mod Sub-Module Model Serial Hw Status ---- --------------------------- ------------------ ----------- ------- ------- 1 Centralized Forwarding Card WS-F6700-CFC 4.1 Ok 5 Policy Feature Card 3 WS-F6K-PFC3B 2.4 Ok 5 MSFC3 Daughterboard WS-SUP720 3.2 Ok 6 Policy Feature Card 3 WS-F6K-PFC3B 2.4 Ok 6 MSFC3 Daughterboard WS-SUP720 3.2 Ok _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
