Hi Group, I just have a question regarding Per Tunnel QoS within a DMVPN... Specifically about the percent command within the CBWFQ child policy.
I know for Per Tunnel QoS it needs to be implemented in a hierichal policy. So I have a parent policy that shapes traffic to 1.5Mbps, then nested inside a child policy that let say gives a traffic class a percentage of 20. My question is where is it calculating the 20% from? The bandwidth statement on the tunnel interface? Or configuration from the parent policy because it's shaping traffic to 1.5MB?...so 20% of 1.5MB? Just looking for some insight :) __________________________________________________________________ DISCLAIMER: This e-mail contains proprietary information some or all of which may be legally privileged. It is for the intended recipient only. If an addressing or transmission error has misdirected this e-mail, please notify the author by replying to this e-mail. If you are not the intended recipient you must not use, disclose, distribute, copy, print, or rely on this e-mail. This message has been scanned for the presence of computer viruses, Spam, and Explicit Content. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
