FYI - Last I checked Brix system can provision (via snmp) ipsla tests to ipsla enabled Cisco routers, but can not emulate it on their own hardware verifiers
Dave On 10/20/2011 05:03 AM, Tony Tauber wrote: > At a previous employer, we used Brix Networks which was acquired by EXFO and > is presented here: > > http://www.exfo.com/en/Products/ProductList.aspx?Id=261 > > That was many years ago and I didn't work with it directly, but that is the > intended use of the product. > > Tony > > On Wed, Oct 19, 2011 at 12:01 PM, Andrew Miehs <[email protected]> wrote: > >> Hi all, >> >> I have been looking at IP SLA and was wondering whether there are any >> appliances around which emulate Ciscos IP SLA so that you can use it as a >> responder, or even better, the transmitter end? >> >> If not, does anyone have any alternative device/ software recommendations? >> >> Thanks >> >> Andrew >> >> >> >> _______________________________________________ >> cisco-nsp mailing list [email protected] >> https://puck.nether.net/mailman/listinfo/cisco-nsp >> archive at http://puck.nether.net/pipermail/cisco-nsp/ >> > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
