Hi all, I am trying to get a GRE tunnel to work over IPSEC but as expected I am running into problems, just not the expected ones.
Phase 1 is fine and established, Phase 2 is fine, SAs are in place. We can mutually ping our loopbacks, and we see encaps/decaps increasing as we ping the loopbacks. This all means that the IPSEC part is done and working. Now the s****y part: GRE tunnel will not work. Tunnel has simple source/destination config, with proper IP addressing, but no good. Outgoing interface is on a VRF, so are Loopback and Tunnel (all on the same VRF). Removed keepalive from tunnel due to VRF. Still no good. Any ideas? Persio _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
