If you're just starting out, you could probably do away with setting the route-maps and just use a network statement under router bgp. Route maps and communities could be a little overkill for what you are maybe trying to do.
Also, the global routing table is almost 7 times bigger now than it was in 1998, so make sure you have enough memory. There are lots of calculators out there to determine appropriate memory requirements based on the expected number of received prefixes. -- Sent from my mobile device On 2011-10-29, at 5:29 AM, Edward avanti <[email protected]> wrote: > Halo All, > > Could someone please advise if the configuring BGP guide from > http://www.cyberflunk.com/~nikm/cisco/bgp.html is still applicable for > today? > The article was wrote on 1998 for 4200, we have 7200 and before I kill our > company off face of planet into void I ask advise on if it still simple > advise for operation in 2011. > > Many regards > Edwardo > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
