Thanks Oliver. We are needing to do Etherbundles (Etherchannel) between our 6509s and our 12410s. Wanted to make sure that this does not have any hidden gotchas like not running XR unless you have a certain amount of ram on the card before we buy buying a few. IPv6 support in 4.1.0 is good to know.
Thanks for the information. -Lee On Sun, Oct 30, 2011 at 6:55 AM, Oliver Boehmer (oboehmer) < [email protected]> wrote: > Lee, > > > I was wondering if anyone knows of issues running the sip-601 with the > > spa-8x1ge-v2 on 12410xr doing etherbundles? Are there any memory > > requirements on the sip card? I understand that you can't do ipv6 in > the > > bundles, but other than this is there any reason this would or does > not > > work? > > It should work, and XR4.1.0 added v6 support for bundles (check > http://www.cisco.com/en/US/docs/routers/xr12000/software/xr12k_r4.1/inte > rfaces/configuration/guide/hc41lbun.html#wp1033144). I'm not aware of > any memory restrictions for bundles, IIRC SIP601 comes with 2GB of route > memory, which is plenty. > Why do you ask? > > oli > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
